Marinpedia.My boat
Menu

Engine data

Specifications for Volvo Penta MD32
FuelDiesel
TypeInboard

Autumn and spring plan for Volvo Penta MD32

Here's what to do when hauling out and launching. Always follow the instruction book for your engine.

Autumn

  • Change the engine oil and oil filter8 l
  • Replace the fuel filter and water separatorFill the tank to reduce condensation.
  • Winterise the raw water systemLet the engine draw in antifreeze until it comes out of the exhaust, or drain the system as described in the owner's manual.
  • Check the coolant's antifreeze protection
  • Remove the impeller and store it dry
  • Check anodes, belts and hoses
  • Fully charge the batteries and disconnect the negative terminal

Spring

  • Fit the impellerReplace it if it is stiff or cracked.
  • Check belts, hoses, oil level and coolant
  • Check through-hulls, seacocks and hose clamps
  • Charge and connect the batteries, clean the terminals
  • After launching, check that nothing is leakingStart the engine and check that cooling water flows out evenly.
Add to calendarTick off in the service bookTwo reminders a year: in April and in October.

Email me the plan

Service data

Engine oil

Capacity including filter
8 l
Note
Applies to the A version (Indenor XDP).

Valve clearance

Intake
0.15 mm
Exhaust
0.25 mm
Measurement ratio
cold engine

Thermostat & RPM

Thermostat
68 °C
Note
Opens at 68–72 °C, fully open at 83 °C.
Idle
max 650 rpm
Max RPM
4350 (obelastad) rpm

Troubleshooting

Troubleshooting by symptom

Manuals

Exploded views & parts catalogs

  • Shop
    Marine Parts Express – exploded views, Volvo Penta diesel (legacy.marinepartsexpress.com)

    Spare parts diagrams by engine model, free to browse.

  • Shop
    Marine-diesel-engine-manuals.com: Volvo Penta (external link)

    Workshop and instruction manuals for AQ, GL/GXi and drives. Some pages can be previewed for free; the full manual must be purchased.

Listings for MD32

Search used:

Boats with MD32

1 boat model · A used boat may have had its engine replaced.

Owners' experiences

No experiences yet. Do you own one? Tell us how it works.

Write about your experience

Related models

Service guides

Frequently asked questions about MD32

How much oil does the MD32 take?

MD32 takes about 8 litres of engine oil including the filter. Applies to the A version (Indenor XDP).

What is the valve clearance on the MD32?

Intake 0.15 mm and exhaust 0.25 mm, cold engine.

Where can I find the owner's manual for MD32?

Links to owner's manuals and workshop manuals are available under Manuals.

What fuel does the MD32 use?

Volvo Penta MD32 runs on diesel.

Sources